Siemens SIMATIC NET CP 443-1 Advanced Скачать руководство пользователя

Страница: 69 / 126

Configuration and operation

6.5 Interface configuration

CP 443-1 Advanced (GX30)
Manual, 03/2019, C79000-G8976-C256-05

6.5

Interface configuration

6.5.1

Network settings

6.5.1.1

IP address assignment and communications path

Networking the gigabit interface and PROFINET interface

If the communications partner can be reached via the PROFINET interface and a router, you

should not network the gigabit interface with the subnet of the communications partner at the

same time. Depending on the communications service or physical network configuration

there may otherwise be conflicts.

Example: Gigabit interface networked but not connected

The gigabit interface is, for example, networked with a subnet A, however not physically

connected to subnet A.
The PROFINET interface is networked with a subnet B and communications partner X in

subnet A can be reached via a router.
There is now communication with communications partner A. During operation, based on the

configuration the CP selects the gigabit interface as the direct possible communications path

to communications partner X. Because it is not connected the gigabit interface is actually not

available and communication cannot be established.

Separating the PROFINET and the gigabit interface

It is advisable to separate the PROFINET interface and gigabit interface physically. If the two

interfaces are not separated, problems can occur when establishing an S7 connection using

the ISO protocol under the following conditions:

●

If connections to the same partner address were configured via different interfaces.

●

if an S7 connection configured at one end needs to be established.

6.5.1.2

Fast Ethernet with the PROFINET and gigabit interface

The common transmission characteristics of the two interfaces are described below. For

information on the transmission speed 1 Gbps of the gigabit interface, see section

Transmission speed of the gigabit interface (Page 71).
The configuration of the network settings "Transmission medium / duplex" is made for both

interfaces in the properties of the port of the relevant interface in the "Port parameters"

parameter group:

●

Row "X1P1": Port properties of the gigabit interface

●

Row "X2P1/2/3/4": Properties of port 1, 2, 3 or 4 of the PROFINET interface

Содержание SIMATIC NET CP 443-1 Advanced































































































































Результаты поиска

Содержание SIMATIC NET CP 443-1 Advanced

Отзывы:

Похожие инструкции для SIMATIC NET CP 443-1 Advanced

Бренды по названию

Популярные бренды

Siemens SIMATIC NET CP 443-1 Advanced, Руководство пользователя

Результаты поиска

Содержание SIMATIC NET CP 443-1 Advanced

Отзывы:

Похожие инструкции для SIMATIC NET CP 443-1 Advanced

Бренды по названию

Популярные бренды