Siemens SIMATIC NET CP 443-1 Advanced, Руководство пользователя

Страница: 44 / 126

Requirements for use
3.2 System environment
CP 443-1 Advanced (GX30)
44
Manual, 03/2019, C79000-G8976-C256-05
CPU Article number of the
CPU: 6ES7...
as of firmware
version
a = multiprocessor mode
b = number of operable CPs
c = CPU resources for SEND/RECEIVE jobs
1
)
d = LOCK/UNLOCK
e = PROFINET IO
4)
a b c d e
CPU 417-4 ..417-4XL04-0AB0 V4.1 +
2)
14 64/64 + -
CPU 417-4 ..417-4XT05-0AB0 V5.1
As of V5.2
+
2)
+
2)
14
14 64/64
64/64 +
+ -
+
CPU 417-4 ..417-4XT07-0AB0 V7.0 +
2)
14 64/64 + +
CPU 412-3H
3)
..412-3HJ14-0AB0 V4.5 +
2)
14 64/64 + -
CPU 414H
3)
..414-4HM14-0AB0 V4.5 +
2)
14 64/64 + -
CPU 417H
3)
..417-4HR14-0AB0 V4.5 +
2)
14 64/64 + -
CPU 417-4H
3)
..417-4HT14-0AB0 V4.5 +
2)
14 64/64 + -
CPU 412-5H
3)
..412-5HK06-0AB0 V6.0 +
2)
14 64/64 + -
CPU 414-5H
3)
..414-5HM06-0AB0 V6.0 +
2)
14 64/64 + -
CPU 416-5H
3)
..416-5HS06-0AB0 V6.0 +
2)
14 64/64 + -
CPU 417-5H 3) ..417-5HT06-0AB0 V6.0 + 2) 14 64/64 + -
CPU 410-5H
3)
..410-5HX08-0AB0 as of V8.0.x +
2)
14 64/64 + -
CPU 410
SMART
3)
..410-5HN08-0AB0 as of V8.1.x +
2)
14 64/64 + -
CPU 410E
3)
..410-5HM08-0AB0 V8.2 +
2)
14 64/64 + -
Legend:
+ → The feature is supported / the specified mode is possible.
- → The feature is not supported / the specified mode is not possible.
1) The calculation of the maximum number of SEND/RECEIVE calls that can be used simultaneously per CP is described in
the section "Characteristic data".
2) When operating the CP as a PROFINET IO controller, the multiprocessor mode is not supported, only the process image
of the assigned CPU can be distributed via the CP (note: this has no influence on communications protocols operating
at the same time in multiprocessor mode).
3) When operating with HCPUs with a firmware version lower than V6.0, the SSEND / SRECV mode on the SEND/RECV
interface is not supported.
4) The PROFINET IO mode Shared Device requires a CPU as of V5.3.
For the maximum possible number of SEND/RECEIVE calls for the CP, refer to the section
Number of simultaneous SEND/RECEIVE calls (Page 26).