Siemens SIMATIC NET CP 443-1 Advanced Скачать руководство пользователя

Страница: 6 / 126

Preface

CP 443-1 Advanced (GX30)

Manual, 03/2019, C79000-G8976-C256-05

If you configure a MAC address (ISO transport connections), we recommend that you use

the MAC address of the relevant interface printed on the module for module configuration!

●

This ensures that you assign a unique MAC address in the subnet!

●

If you replace a module, the MAC address of the predecessor is adopted when you load

the configuration data. Configured ISO transport connections remain operable.

License conditions

Note
Open source software
The product contains open source software. Read the license conditions for open source

software carefully before using the product.

You will find license conditions in the following document on the supplied data medium:

●

OSS_CP4431_99.pdf

Firmware

The firmware is signed and encrypted. This ensures that only firmware created by Siemens

can be downloaded to the device.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.
For additional information on industrial security measures that may be implemented, please

visit

Link: (

https://www.siemens.com/industrialsecurity

)

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers’ exposure

to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

Link: (

https://www.siemens.com/industrialsecurity

)

Содержание SIMATIC NET CP 443-1 Advanced































































































































Результаты поиска

Содержание SIMATIC NET CP 443-1 Advanced

Отзывы:

Похожие инструкции для SIMATIC NET CP 443-1 Advanced

Бренды по названию

Популярные бренды

Siemens SIMATIC NET CP 443-1 Advanced, Руководство пользователя

Результаты поиска

Содержание SIMATIC NET CP 443-1 Advanced

Отзывы:

Похожие инструкции для SIMATIC NET CP 443-1 Advanced

Бренды по названию

Популярные бренды