Siemens SIMATIC NET CP 443-1 Advanced Скачать руководство пользователя

Страница: 111 / 126

CP 443-1 Advanced (GX30)
Manual, 03/2019, C79000-G8976-C256-05

111

Approvals

Approvals issued

Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.

You can check which of the following approvals have been granted for your product by the

markings on the type plate.
Approvals for shipbuilding are not printed on the device type plate.

Approval for CP and C-PLUG

The following approvals apply to the CP and the supplied C-PLUG.

EC declaration of conformity

The CP meets the requirements and safety objectives of the following EU directives and it

complies with the harmonized European standards (EN) for programmable logic controllers

which are published in the official documentation of the European Union.

●

94/9/EC (ATEX explosion protection directive, up to 19.04.2016)
Directive of the European Parliament and the Council of March 23, 1994 on the

approximation of the laws of the Member States concerning equipment and protective

systems intended for use in potentially explosive atmospheres

●

2014/34/EU (ATEX explosion protection directive, as of 20/04/2016)
Directive of the European Parliament and the Council of 26 Febrary 2014 on the

approximation of the laws of the Member States concerning equipment and protective

systems intended for use in potentially explosive atmospheres, official journal of the EU

L96, 29/03/2014, pages. 309-356

●

2004/108/EC (EMC up to 19.04.2016)
Directive of the European Parliament and of the Council of December 15, 2004 on the

approximation of the laws of the member states relating to electromagnetic compatibility.

Содержание SIMATIC NET CP 443-1 Advanced































































































































Результаты поиска

Содержание SIMATIC NET CP 443-1 Advanced

Отзывы:

Похожие инструкции для SIMATIC NET CP 443-1 Advanced

Бренды по названию

Популярные бренды

Siemens SIMATIC NET CP 443-1 Advanced, Руководство пользователя

Результаты поиска

Содержание SIMATIC NET CP 443-1 Advanced

Отзывы:

Похожие инструкции для SIMATIC NET CP 443-1 Advanced

Бренды по названию

Популярные бренды