Siemens SIMATIC MV500 Скачать руководство пользователя страница 95

Страница: 95 / 294

Network and system integration

4.3 System configuration of the optical reader as PROFINET IO device with switch and FB 79 or Ident profile

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

•

The optical reader is controlled via PROFINET IO/PROFIBUS DP-V1 using the Ident profile

block by the S7 controller.

•

The result is output via PROFINET IO/PROFIBUS DP-V1 to the S7 controller.

•

The optical reader is supplied with power via the communication module.

•

The optical reader is triggered either via digital I/O, S7 controller or via the built-in auto-

trigger function.

•

A PC/PG is connected via the Ethernet interface to allow adjustment of the device.

4.3

System configuration of the optical reader as PROFINET IO device

with switch and FB 79 or Ident profile

Note
Power supply using "Power over Ethernet" (PoE)

If the optical reader is supplied by PoE, for example when connected to a

SCALANCE X108POE, the Power IO RS232 cable is not needed.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 95 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: