Siemens SIMATIC MV500 Скачать руководство пользователя страница 242

Страница: 242 / 294

Service and maintenance

10.4 Module replacement

SIMATIC MV500

242

Operating Instructions, 03/2021, C79000-G8976-C494-05

10.4

Module replacement

Before replacing a module

WARNING

Read the manual of the SIMATIC controller you using

Prior to installation, connecting up and commissioning, read the relevant sections in the

manual of the SIMATIC controller you are using. When installing and connecting up, keep to

the procedures described in the manual.

CAUTION

Installation/removal with the power off

Wire up the SIMATIC controller and the modules and readers to be connected only when the

power is off. Make sure that the power supply is switched off when installing/uninstalling

the devices as well as the built-in ring light, EF lens and micro SD adapter.

NOTICE
Backing up the configuration

Prior to replacing the module, make sure that you back up the configuration stored on the

optical reader so that you can transfer this to the newly connected reader following module

replacement. The backup (* .xml) is made using the WBM via the "Device > System > Device

configuration" menu.
You can save the configuration on the PC or on an SD card.

Note
Compatibility and device replacement of SIMATIC MV440 and SIMATIC MV540

Note that the SIMATIC MV440 and SIMATIC MV540 devices are mutually compatible and can

be exchanged in a PROFINET IO network without any problems.

Note
The topology of the plant must be correctly configured

To replace the device without a removable medium, the topology of the system must be

correctly configured. Use the topology editor for this.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 242 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: