Siemens SIMATIC MV500 Скачать руководство пользователя страница 235

Страница: 235 / 294

Service and maintenance

10.1 Error and diagnostics messages

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

235

10.1.7

Diagnostics during the "READ" function

The following table shows possible errors displayed by the "READ" LED during execution of

the "READ" function.

Table 10- 6 Display of operating states

LED

labeling

Meaning

Description and corrective measures

READ

Green flashing:

The "READ" function is bring executed.

The "READ" function is currently running and the reader is

going through the steps of automatic adaptation.

Red, flashing (frequency 0.5 s):

The "READ" function setting was not success-

ful.

The "READ" function was not successful. The error is dis-

played for 5 s, the "READ" function is then terminated.

Possible cause:
•

The lighting conditions are not sufficient for an automat-

ic adjustment.

•

(b) The object to be read does not have sufficient con-

trast to adjust the focus (EF lens).

•

(d) The code to be read is neither of the "DMC" type nor

a 1D barcode and the "Fast code type detection" parame-

ter is enabled.

•

(e) The source program has unsuitable settings for the

code to be read - e.g. the number of decoder steps, their

ROI or the number of codes to be read.

Solutions:
•

(a) Make sure you have suitable lighting.

•

(a) Use a built-in ring light with polarization filter to

reduce reflections.

•

(b) Make sure that there is an object with sufficient con-

trast in the field of view of the reader, that the object is

sufficiently far away from the reader (at least 30 - 60 cm

depending on the lens) and that the object is sufficiently

illuminated.

•

reader's ROI.

•

(d) Disable the parameter "Fast code type detection".

•

(e) Change the source program or select another source

program in the options.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 235 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: