Siemens SIMATIC MV500 Скачать руководство пользователя страница 113 | Manualshive

Страница: 113 / 294

Siemens SIMATIC MV500 Скачать руководство пользователя страница 113

Mounting

5.5 Mounting with external ring light

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

113

Proceed as follows to mount the SIMATIC MV540 optical reader with an external ring light:
1.

Remove the protective foil from the reader.

2.

When using an E-focus lens: Insert the straight connector of the lens cable into the interface

of the reader (a).

3.

Screw the desired lens into the lens mount of the reader.
Ensure the correct alignment of the lens so that the interface is close to the

cutout/interface (a). If needed, unscrew the lens slightly. If needed, align the lens using

the knurled nut/spring/counter ring.

4.

When using an E-focus lens: Use the lens cable to connect the E-focus lens to the reader.
Insert the angled connector of the lens cable into the interface of the lens and the straight

connector into the interface of the reader. Ensure that the cable does not become twisted.

5.

Insert the micro SD adapter into the reader interface provided.
If needed, insert a micro SD card into the adapter

6.

Screw the protective lens barrel (article number 6GF3540-8AC11) onto the reader.

7.

Mount the ring light holder on the reader with the 4 screws (1-2 Nm) that are supplied.

8.

Mount the external ring light to the ring light holder (1-2 Nm) with the 2 supplied fastening

screws.

9.

Mount the reader on a suitable mounting fixture or holder (4x M4, 1-2 Nm).
Use the mounting plate for SIMATIC MV500 or a mounting device with matching holes.
Note that the reader has two different drilling templates (50 x 60/57 x 57).

10.Select a suitable location to install the device.

«
...
111
112
113
114
115
...
»

Содержание SIMATIC MV500







































































































































































































































































































Отзывы:

Нет отзывов