Siemens SIMATIC MV500 Скачать руководство пользователя страница 215

Страница: 215 / 294

Process interfacing via an automation system (PLC, PC)

9.9 SNMP

SIMATIC MV500
Operating Instructions, 03/2021, C79000-G8976-C494-05

215

Scope of performance of the optical reader as an SNMP agent

The optical reader supports data query in the following SNMP versions:
•

SNMPv1 (standard)

For the optical reader, only SNMP variables from the following MIBs are supported:
•

LLDP-MIB

•

Standard MIB II (according to RFC1213)

–

Group "System"

–

Group "Interfaces"

Write access is permitted only for the following MIB objects of the "System" group:
•

sysContact

•

sysLocation

•

sysName

For all other MIB objects / MIB object groups, only read access is possible for security reasons.
Traps are not supported by the optical reader.

Access permissions using community names

The optical reader uses the following community strings to control the access rights to the

SNMP agent:

Table 9- 62 Access rights in the SNMP agent

Type of access

Default community string

Read access

public

Read and write access

private

NOTICE
Change community string

Note that the default community string is generally known and therefore does not provide

effective protection.
To make sure that no unauthorized persons can access the device, we recommend that you

change the community string when the device is first set up.

Содержание SIMATIC MV500







































































































































































































































































































Результаты поиска

Содержание SIMATIC MV500

Отзывы:

Siemens SIMATIC MV500, Руководство по эксплуатации, Страница: 215 / 294

Результаты поиска

Содержание SIMATIC MV500

Отзывы: