Siemens SIMATIC FM 353, Руководство пользователя

Страница: 119 / 361

Programming the Technological Functions
6-39
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0
The checkback signals “Process in progress” and “Position reached. Stop” are not
reported back to the user program until the FM has detected and processed the
Start signal (
2 FM cycles).
When calling the POS_CTRL block and the relevant control/checkback signals,
the subsequent signals are generated so that starting of the procedure can be de-
tected earlier than would otherwise be the case.
Signal Description
Execution started
(AW-DB, DBX13.6)
= TRUE When a mode/movement is started with the relevant
control signals or when the status for “Process in
progress” (AW-DB, DBX23.1) = 1
“Execution started”
“Process in progress”
when the block is called/
started
when the FM starts tra-
versing movement
Position
(AW-DB, DBX13.7)
= FALSE When status signal “Position reached. Stop.” (AW-DB,
DBX25.7) = 0 is returned or when a mode is started
with the relevant control signals.
“Position”
“Position reached. Stop”
when the block is called/
started
when FM starts traversing
movement
Furthermore, various settings and commands are required to control the FM 353.
In all cases, those commands and settings are transferred which are activated at
the time when the POS_CTRL block is called. The commands are canceled after
the transfer, also in case of error.
Operating Modes
System Data
Write
Request
Function T STE REF SM MDI A/AE
See
Sect.
Single functions Internal DBB34 and 35 V x V V V V 9.3.2
Single commands Internal DBB36 and 37 x x x x x x 9.3.3
x Data are accepted or processed.
V Data required to move the axis.