Siemens simatic c7-621, Руководство пользователя

Страница: 11 / 58

04/99 Setup and Configuration of the AS-i Network
Getting Started with C7-621-AS-i 11
Conf.Mode: Enabled
Disable setconf
You must switch from protected mode to configuring mode. To do this, press
F2
.
Wait a moment, then press
F5
. If the above mask appears, you may proceed. Otherwise, repeat
the last two steps.
Quit the mask by pressing the
ESC
key once.
In the Project menu , select the menu item Address by pressing the
F3
key. Enter the old address
in the first field, and the new address in the second field.
Old: 00 New: 01
Set Adr.
Press
F4
to confirm your entry.
If you have made all the entries and settings correctly, the message NO_ERROR will appear in the
display of the C7-621-AS-i control system.
Press
F5
to complete the current addressing process.
Connect the next slave to your AS-i shaped cable according to the setup diagram.
Repeat your entries in the
Address menu
for all slaves used in the application.
Once you have addressed all the slaves, quit the Address menu by pressing the
ESC
key twice.