Siemens simatic c7-621, Руководство пользователя

Страница: 10 / 58

Setup and Configuration of the AS-i Network 04/99
10 Getting Started with C7-621-AS-i
The C7-CPU must be in STOP mode for you to be able to configure your AS-i network.
On the C7-621-AS-i control system, select the System Functions menu by pressing the
S H IF T 0
keys.
Press
F1
to select the C7 System Functions menu.
Press
F3
to select the operating mode STOP. The STOP LED lights up.
If a password has not yet been entered, the system requests one. When the C7 is shipped, the
password is preset to 100. Enter the digits 100 via the numeric keypad and confirm your input with
ENTER. Select the operating mode STOP.
To quit the mask, press the
ESC
key once.
Now press the
F5
key to display the start menu for the individual AS-i functions.
Status Project
Version
In the start menu for the AS-i functions, select Project by pressing
F4
once.
AUTOPROG Config
Address
For setting addresses, the mode set for the device must be the configuring mode. When the C7 is
shipped, this mode is preset by default.
To check whether the device is in the configuring mode, select Config with the
F4
key.
Note:
If the following mask appears, you can skip the next two steps.