manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 189 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 189

Safety Notes and Access Rights

Safety Notes

!

DANGER

Hazard due to high voltage
Non-observance will lead to death or serious injury.
Work may only be carried out by trained personnel who are familiar with and observe the safety require-
ments and precautions.

²

Work may never be carried out if there is any hazardous voltage present.

²

De-energize the device.

²

Isolating device: Connect a suitable isolating device upstream to de-energize the device. The isolating
device must be installed near the device, it must be easily accessible to the user and it must be marked
as an isolating device for the device.

²

Secure the supply voltage with an approved (UL/IEC) fuse: 1.6 A, type C.

²

If a melting fuse is used, a suitable approved (UL/IEC) fuse holder has to be used.

i

i

NOTE

For electrical installations you have to observe and comply with the national and international provisions
concerning the installation of electric power installation and the low-voltage directive 2006/95/EG.

Access Rights

Access Rights for Configuration and Maintenance

To determine access rights, you have to set up passwords when configuring the device. You have to specify an
activation password and a maintenance password (see 

2.2.2 Password Management

).

The activation password is required to enable parameter changes in the device.
The maintenance password is required to make changes in the device using the Maintenance tab.

i

i

NOTE

If you do not specify new passwords, the factory-set default passwords (see 

2.2.2 Password Management

)

are valid.

Access Rights for Communication

The access rights for the communication via Ethernet with Modbus TCP protocol are made for port 502 and
for the user port. You can assign either full access rights or read-only authorization (see 

Table 2-19

).

You can also determine the access rights for serial communication using the Modbus RTU protocol. You can
assign either full access rights or read-only authorization (see 

Table 2-21

).

Communication via Ethernet with IEC 61850 server protocol and serial communication with IEC
60870-5-103 protocol do not require any access rights.

9.1

Commissioning and First Steps
9.1 Safety Notes and Access Rights

188

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов