manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 196 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 196

Environmental Protection Hints

Disposal of Old Equipment and Batteries (Applicable only for European Union and Countries with a Recycling
System)

The disposal of our products and possible recycling of their components after decommissioning has to be
carried out by an accredited recycling company, or the products/components must be taken to applicable
collection points. Such disposal activities must comply with all local laws, guidelines and environmental speci-
fications of the country in which the disposal is done. For the European Union the sustainable disposal of elec-
tronic scrap is defined in the respective regulation for "waste electrical and electronic equipment" (WEEE).

The crossed-out wheelie bin on the products, packaging and/or accompanying documents means
that used electrical and electronic products and batteries must not be mixed with normal house-
hold waste.
According to national legislation, penalties may be charged for incorrect disposal of such
waste.

By disposing of these products correctly you will help to save valuable resources and prevent any potential
negative effects on human health and the environment.

i

i

NOTE

Our products and batteries must not be disposed of as household waste. For disposing batteries it is neces-
sary to observe the local national/international directives.

Disposal of Mobile Storage Devices (e.g. USB Sticks and Memory Cards)

When disposing of/transferring mobile storage devices, using the format or delete functions only changes the
file management information and does not completely delete the data from your mobile storage device. When
disposing of or transferring a mobile storage device, Siemens strongly recommends physically destroying it or
completely deleting data from the mobile storage device by using a commercially available computer data
erasing software.

REACH/RoHS Declaration

You can find our current REACH/RoHS declarations at:

https://www.siemens.com/global/en/home/products/energy/ecotransparency/ecotransparency-down-
loads.html

i

i

NOTE

You can find more information about activities and programs to protect the climate at the EcoTransparency
website:

https://www.siemens.com/global/en/home/products/energy/ecotransparency.html

9.4

Commissioning and First Steps

9.4 Environmental Protection Hints

SICAM, SICAM P850/P855 7KG85X, Manual

195

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов