manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 122 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 122

Rectangular
Changes per
Minute (CPM)

Voltage Fluctuation %
120-V Lamp
50-Hz System

120-V Lamp
60-Hz System

230-V Lamp
50-Hz System

230-V Lamp
60-Hz System

4800

Test not required

4.837

Test not required

3.263

Note 1: If the CPM is 1620, the modulation frequency of the rectangular square wave is 13.5 Hz.
Note 2: For tests according to this table, the first voltage change is applied within 5 s after the P

st

 evaluation

is started. Flickermeters having a pretest time to charge the filters, indicate when the P

st

 evaluation starts.

With the indication, the testing authority can determine when to start the rectangular modulation pattern.

All the voltage fluctuation values in 

Table 6-4

 are multiplied with a fixed factor k. P

st

 is determined by the

factor k. Siemens specifies the working range of the classifier as 0.2 ≤ k ≤ 10. The corresponding value P

stk

 is

within ± 5 % or ± 0.05 of the factor k, depending on which value is greater.
The rectangular modulation must be applied with a duty cycle of 50 % ± 2 %, and the transition time from one
voltage level to the next must be less than 0.5 ms.

Configuration and Value View via Web Pages

Configuration of the Flicker

To configure the Flicker lamp model in the Configuration tab, proceed as follows:

•

In the navigation window, click AC measurement.

[sc_config_ac_measurement_p85x, 1, en_US]

Figure 6-5

Configuration Tab, Flicker

•

Select a Flicker lamp model according to the following table.

6.2.2

Power Quality

6.2 Flicker

SICAM, SICAM P850/P855 7KG85X, Manual

121

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов