manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 261 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 261

Operational Indications

Operational Indications

Indication

Description

Notes

Device OK

The device startup was successful. Indication ON: Device ready

Battery Failure

Battery voltage < 2.7 V or no
battery inserted

Indication ON: Battery failure

Time Synchronization
Error

Error during the time synchroniza-
tion from the NTP server or
fieldbus

Indication OFF: At least 1 time message was received
during the set timer (Error indication after). The time
stamp is set when the first valid time information or time
synchronization is received.
Indication ON: No time message was received during the
set timer (Error indication after).
The time stamp is set after the Error indication after timer
has expired and no synchronization message was received.
Parameter range: see chapter 

13.2.2 Date and Time

.

Error sources with NTP or fieldbus: Error indication after
timer expires and no synchronization message was received

Error during internal time synchro-
nization

Indication ON: RTC time invalid (during device start in case
of battery failure)
Indication OFF: After setting the clock via HTML
During battery failure at device startup

Default IP Address

The device has started with a
default IP address after pressing
the push-button for more than 3 s
during operation.

Indication ON: The push-button was pressed and default IP
is set in the device.

Primary NTP Server
Error

Faulty or no response from the
primary NTP server

Indication ON: Error
Indication OFF: Valid time messages have been received for
a configured period.
Only for time synchronization via Ethernet NTP

Secondary NTP Server
Error

Faulty or no response from the
secondary NTP server

Indication ON: Error
Indication OFF: Valid time messages have been received for
a configured period.
Only for time synchronization via Ethernet NTP

Daylight Saving Time

Switching between daylight saving
time/standard time

Indication ON: Daylight saving time
Indication OFF: Standard time

Ethernet Link Error

Ethernet connection error

Indication ON: Error
Indication OFF: Ethernet link recognized

Modbus TCP OK
(Modbus TCP Server)

At least 1 Modbus TCP server
connection has received Modbus
messages.

Indication ON: At least 1 Modbus message was received
during the set communication supervision time. The time
stamp is set when the first valid message is received.
Indication OFF: No Modbus message was received during
the set communication supervision time

IEC 61850 Communi-
cation OK

Communication via protocol IEC
61850 is correct.

Indication ON: At least one message was received during
the set monitoring time. The time stamp is set when the
first valid message is received.
Indication OFF: No message was received during the set
monitoring time.

13.1

13.1.1

Operational Indications and Operating Parameters
13.1 Operational Indications

260

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов