manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 169 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 169

Downloading Multiple Files

i

i

NOTE

The Record List of Multiple File Download with Internet Explorer is identical for trend recorder, measure-
ment recorder and waveform recorder.

To do a multiple file download, execute the same steps as for the single file download, but select the down-
load type Multiple file download and proceed further as follows:

•

Select the Start date, the End date, and the Record type.

•

Select the Multiple file for the Download type.

•

Select the multiple files in the Record list.

•

Enter a Save directory for the file storage or select a path using the Select directory option.

[sc_save_directory, 1, en_US]

Figure 7-18

Value View and Evaluation Tab, Download Multiple Files – Saving Files (for Example
Trend Recorder)

Display and Other Functions
7.3 File Download

168

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов