manualshive.com logo in svg

Siemens SICAM 7KG85X, Руководство пользователя, Страница: 227 / 281

Поделиться
Скачать
Siemens SICAM 7KG85X Скачать руководство пользователя страница 227

i

i

NOTE

If you have activated the option in your Web browser to transfer the local directory name together with the
file name when uploading files, the total number of characters in the directory and file names must not
exceed 100 English characters. Otherwise, the CFG file in your device will not be updated.

Activation and Cancel of the Configuration Change

Refer to 

2.1 Activation and Cancel of the Configuration Change

.

Access to the Passive Set of Parameters by Multiple Users

Reading the Passive Set of Parameters

The user interface allows the simultaneous read access of up to 2 users to the passive set of parameters.

Editing the Passive Set of Parameters

The passive set of parameters can only be edited by one user even though multiple users have simultaneous
read access.
Once a user changes a parameter on the Web page, the write access is denied for all other users.
If the write access is blocked, modified in brackets will be displayed in the upper right corner of the Web page.
The user performing the changes will see modified without brackets.

[sc_configuration_modified, 1, en_US]

If a user performs changes, the server starts a 20-minute timer. If no further changes to the set of parameters
are entered by the time the timer has counted down, write access is released again for all users. In this case,
the modified data are discarded and the passive set of parameters is overwritten with the content of the active
set of parameters.
If new changes to the passive parameter set are made during the 20-minute countdown, the timer is restarted
by each action.
If the user has completed the changes to the passive set of parameters or finished the parameterization by
clicking Cancel, write access for all users is also released.

9.11.2.11

9.11.2.12

Commissioning and First Steps
9.11 Operation via PC

226

SICAM, SICAM P850/P855 7KG85X, Manual

E50417-H1040-C482-A9, Edition 03.2022

Содержание SICAM 7KG85X


























































































































































































































































































Отзывы:

Нет отзывов