manualshive.com logo in svg

Siemens POLYMOBIL Plus, Инструкция по эксплуатации, Страница: 3 / 50

Поделиться
Скачать
Siemens POLYMOBIL Plus Скачать руководство пользователя страница 3

Contents

0 - 3

Siemens AG

 

SPR8-125.061.02

Page  3 of  4

POLYMOBIL Plus

Medical Engineering

Rev. 01

01.00

TD SD 24

 

 

1 _______Prerequisites ___________________________________________________ 1-1

Text emphasis .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1-1
Required documents   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   1-1
Tools, measurement and auxiliary devices required   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   1-1
Safety information and protective measures   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   1-2
Replacing damaged or missing screws  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   1-4
Cleaning .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   1-4

2 _______Checking the assemblies _________________________________________ 2-1

Preparation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-1
Position and function of the LEDs, fuses, test points and potentiometers.  .  .  .  .  .  .  .   2-4

D915 CPU, control and measurement value acquisition   .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-4
D925 Rotating anode starter, filament inverter, ON/OFF switching circuit   .  .  .  .  .   2-5
U1 power supply unit 5 V ± 5% / 15 V ± 10 %.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-6
U2 power supply unit 12.5 V ± 10 %.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-6
D950 capacitor charging circuit  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-7
D970 Capacitor bank   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-7
Status of the LED’s (optimum condition)   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   2-8

3 _______Troubleshooting_________________________________________________ 3-1

Error messages  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   3-1
Troubleshooting after error messages .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   3-2

4 _______Service programs _______________________________________________ 4-1

Service programs available  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   4-2

5 _______Measurements __________________________________________________ 5-1

Line voltage  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-1
Measuring KVact and Itube  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-1
Capacitor charging circuit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-2

Charging frequency  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-2
Capacitor charging current   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-3
Capacitor voltage (Uc) and charging time .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-4

Rotating anode starter.  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-5

Acceleration  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-5
Brakes .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-6

kV Control .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-7

Checking the maximum main inverter frequency  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-7
Measuring the oscillating current   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-8
Measuring the kVact and kVnom  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .   5-9
Error in the kVact acquisition   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5-10

Testing the filament circuit .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5-11

Filament circuit in standby .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5-11
Setting the maximum filament inverter frequency .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 5-12

Page

Содержание POLYMOBIL Plus



















































Отзывы:

Нет отзывов