Siemens HR676G8.1A, Инструкция по эксплуатации

Страница: 35 / 64

Dishes
en
35
P
Dishes
Dishes
You can use the "Dishes" operating mode to prepare a
wide variety of food. The appliance chooses the optimal
setting for you.
Information on the settings
■
The cooking result depends on the quality of the
food and the size and type of cookware. For an
optimal cooking result, use food that is in good
condition and chilled meat only. For frozen food, use
food straight out of the freezer only.
■
For some food, a temperature, heating mode and
cooking time is suggested. The temperature and the
cooking time can be changed according to your
requirements.
■
For other dishes, you will be asked to enter the
weight. Always enter the total weight unless the
appliance asks for something different. The
appliance will then apply the time and temperature
settings for you.
It is not possible to set weights outside of the
intended weight range.
■
When roasting dishes for which the appliance will
apply the temperature selection for you,
temperatures of up to 300 °C can be saved.
Therefore, make sure that you use cookware that is
sufficiently heat resistant.
■
Information is provided, e.g. on cookware, shelf
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc., during
cooking. This is shown in the display shortly after
operation starts. An audible signal will remind you at
the right time.
■
Information on the right kind of cookware to use and
tips and tricks for the preparation can be found at
the end of the instruction manual.
~
"Tested for you
in our cooking studio" on page 36
Steam-assisted cooking
For some food, the steam function is automatically
activated. The appliance instructs you to fill the water
tank. General information on the steam function can be
found in the relevant section.
~
"Steam" on page 18
:
Warning
Risk of scalding!
When you open the appliance door, hot steam can
escape. Steam may not be visible, depending on its
temperature. When opening, do not stand too close to
the appliance. Open the appliance door carefully. Keep
children away.
Meat thermometer
For some food, you can also use the meat
thermometer. Once you have inserted the meat
thermometer into the appliance, the food that is suitable
for it will be displayed. You can change the interior
temperature of the cooking compartment and the core
temperature.
~
"Meat thermometer" on page 24
Selecting and setting food
1.
Press the menu button.
The operating modes menu opens.
2.
Select the "Dishes" operating mode.
The first program group appears on the display.
3.
Use the rotary selector to select the required
program group.
4.
Touch the "Next" field.
5.
Use the rotary selector to select the food.
You will be guided through the entire setting process for
your chosen food. Always touch the "Next" field.
Once you have implemented all the settings, start by
pressing the "Start/stop" button.
Note:
The appliance informs you if the cooking
compartment is still too hot for your chosen food.
The program has ended
An audible signal sounds. “Finished” appears in the
status bar. The oven stops heating. You can cancel the
audible signal early using the
0
button.
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested.
However, you can change this if you wish.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears on the display.
Cancelling the program
Press the "On/off" button. All settings are deleted. You
can implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
Refer to the time-setting options.
~
"Time-setting
options" on page 21
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
operation is to start. None of the settings can be
changed. Please remember that easily spoiled foods
must not be allowed to remain in the cooking
compartment for too long.