Siemens HiPath 1100, Руководство по обслуживанию

Страница: 213 / 389

Service Manual
6-213
Configuring the system specifically for the client
Table of the System’s Programming Codes
Cascade Call
Forwarding part-
ner 181 0 - Last
1 - First automatic 0 - Last
Time in UCD
Queue 031 UCD Subscriber Group (00 to 99) in 5-second
cycles # instead of
group 12 (1 minute)
On Hold Message
before Signaling
UCD Call 032 UCD Subscriber Group
∗
- to enable
# - to disable
# instead of
group # - to disable
Minimum time for
UCD Queue On
Hold message 033 UCD Subscriber group (00 to 99) in 5-second
cycles # instead of
group 00 (0
seconds)
Hunt Groups (HG) 021 Hunt Group (HG) extension or
∗
- to delete
# instead of
group None
Call forwarding
within a Hunt
Group (HG) 223
∗
- to enable
# - to disable
Automatic # - to disable
Hunt Group selec-
tion (HG) 022 Hunt Group (HG) 1 - Linear
2 - Round-robin # instead of
group 1- Linear
Timeout within a
Hunt Group (HG) 242 Hunt Group (HG) (01 to 24) in 5-second
cycles Automatic 04
Override 144 extension 0 - Without permission
1 - With permission and
beep # instead of
extension 0
Silent Monitoring 046 extension
∗
- to enable
# - to disable
# instead of
extension # - to disable
Call Identification
for analog exten-
sion (CLIP) 010 Analog extension 0 - No Caller ID
1 - DTMF before ringing
2 - DTMF during ringing
3 - FSK before ringing
4 - FSK during ringing
5 = FSK prior to ringing or
during a conversation
6 = FSK during ringing or a
conversation # instead of
extension 0 - Other
countries
3 - Korea
5 - France FT
Hide group prefix 188 extension
∗
- to enable
# - to disable
# instead of
extension # - to disable
Electronic Lock
Password 126 extension 00000 to 99999
or
* - reset Automatic 00000
Timeout Call
Forwarding - No
Answer 130 (01 to 99) in 5-second
cycles Automatic 06 (30
seconds)
Dialing Mode 168 Extension Detection:
0 - Automatic
1 - Pulse (DP)
2 - Tone (DTMF) # instead of
extension 0 - Automatic
Programmed
Functions
Code Intermediate data Data to be
programmed
Completing
data entry
Default