Siemens FC300 Скачать руководство пользователя страница 94

Страница: 94 / 518

The elements are actuated by touching the glass panel on the appropriate key. Pressing harder

will not activate the key, but using a thumb instead of a finger tip will help. The text display

above the operating elements gives a menu-guided operation of the individual device function/

parameters. Successful operation of the key is confirmed by a small green LED at the right of

the display.

①

Full graphical display

②

LED (for indication of key operation)

③

Touch keypad

Figure 6-1

Local display

Note
(Re-)calibration of the keypad
When the lid is closed, all keys are (re-)calibrated (< 5 seconds). During (re-)calibration the

LED is on and the keys cannot be operated.
If one of the keys is pressed for more than 10 seconds, the (re-)calibration of this key begins

which has a duration of less than 10 seconds. Release the key for further operation.

Note
HMI timeout
If no key is pressed for 10 minutes, the display switches to show operation view. If Backlight

is set to Automatic, display backlight goes off automatically 30 seconds after the last keypress.

Note
Operation does not require opening of the device. This means that the high degree of protection

of IP67 and safety in hazardous areas are guaranteed at all times.

6.3.3

Initial startup

The first time the device is powered up, you will be prompted to set the language. The device

always starts up showing "Language" in English. When the language has been set, you will

be prompted to set the date and time.

Commissioning
6.3 Local commissioning

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

Содержание FC300







































































































































































































































































































































































































































































































































Результаты поиска

Содержание FC300

Отзывы:

Siemens FC300, Руководство по эксплуатации, Страница: 94 / 518

Результаты поиска

Содержание FC300

Отзывы: