manualshive.com logo in svg

Siemens FC300, Руководство по эксплуатации, Страница: 173 / 518

Поделиться
Скачать
Siemens FC300 Скачать руководство пользователя страница 173

9.7

Disposal

Devices described in this manual should be recycled. They may not be 

disposed of in the municipal waste disposal services according to the Di‐

rective 2012/19/EC on waste electronic and electrical equipment (WEEE).
Devices can be returned to the supplier within the EC, or to a locally ap‐

proved disposal service for eco-friendly recycling. Observe the specific reg‐

ulations valid in your country.
Further information about devices containing batteries can be found at: In‐

formation about battery / product return (WEEE) (

https://

support.industry.siemens.com/cs/document/109479891/

)

Note
Special disposal required
The device includes components that require special disposal.
● Dispose of the device properly and environmentally through a local waste disposal 

contractor.

9.8

Spare parts/Accessories

9.8.1

Ordering of spare parts

Ensure that your ordering data is not outdated. The latest ordering data is always available on 

the Internet: Catalog process instrumentation (

http://www.siemens.com/

processinstrumentation/catalogs

)

9.8.2

Ex approved products

WARNING

Repair of Ex-approved products
It is the customer's responsibility that repair of Ex-approved products fulfill national 

requirements.

Service and maintenance

9.8 Spare parts/Accessories

MASS 2100 & FC300 (FCT030)

Operating Instructions, 06/2017, A5E39789040-AA

173

Содержание FC300







































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов