Siemens CLINITEK Status+ Скачать руководство пользователя страница 47

Страница: 47 / 172

CLINITEK Analyzer Operator’s Guide

Op
erations

1. Select

START

The

Prepare Test

screen displays steps on how to perform the test.

A timer displays the amount of time remaining to complete the
task.

2. Draw the urine sample to the line marked on the pipette

(approximately 0.2 mL).

For instructions on the cassette, see the cassette instructions for
use insert.

3. Add the entire contents of the pipette into the sample well of the

test cassette.

After the 8-second countdown ends, the analyzer pulls in the test
table and cassette, and then calibrates.

Note

Each time you run a test, the analyzer calibrates.

After the calibration finishes, the analyzer starts analyzing the
cassette, and the

Analyzing

screen displays.

The analyzer displays either of the following screens:

•

Analyzing

If the cassette is still being analyzed.

•

Results

If analyzing the cassette has been completed.

A timer counts down the time remaining in the cassette analysis
process. After the countdown ends, the analyzer displays the test
results on the

Results

screen.

The results display on the screen for 2 minutes. Then, the display
returns to the

Select Ready

screen.

The test table and cassette move out of the analyzer.

CAUTION

Do not push or pull the test table because the calibration
might fail or the movement might cause table positioning
errors.
Do not move or bump the table while the analyzer calibrates.
The calibration might fail.

Содержание CLINITEK Status+













































































































































































Результаты поиска

Содержание CLINITEK Status+

Отзывы:

Siemens CLINITEK Status+, Руководство оператора, Страница: 47 / 172

Результаты поиска

Содержание CLINITEK Status+

Отзывы: