Siemens CLINITEK Status+ Скачать руководство пользователя страница 124

Страница: 124 / 172

124

CLINITEK Analyzer Operator’s Guide

System C

onf

iguration

3. Insert the memory card (label side up, arrow facing the slot) into

the memory card slot to the left of the printer mechanism, until
the card stops and then clicks (see

Figure 7-1

Figure 7-1: Memory Card Slot

4. Power on the analyzer by pressing the on/off power button.

•

The analyzer beeps repeatedly in a low tone for up to 90
seconds.

•

The

System Test in progress

screen displays briefly.

•

The test table extends.

•

The

Software Update

screen displays.

5. Select

Install Software

A blank screen displays for up to 3 minutes during the following
installation process:

•

The analyzer beeps repeatedly in a low tone for up to 75
seconds.

•

Next, you hear 1 longer beep.

1 Memory Card Slot

CAUTION

Do not remove the memory card or disconnect the unit from
the power supply during an upgrade. If you do, the
installation fails.

Содержание CLINITEK Status+













































































































































































Результаты поиска

Содержание CLINITEK Status+

Отзывы:

Siemens CLINITEK Status+, Руководство оператора, Страница: 124 / 172

Результаты поиска

Содержание CLINITEK Status+

Отзывы: