Siemens CLINITEK Status+ Скачать руководство пользователя страница 11

Страница: 11 / 172

CLINITEK Analyzer Operator’s Guide

Introduction

1. Place the analyzer on a level work surface where the temperature

and humidity are fairly constant.

2. Connect the appropriate end of the power cord into the power

inlet socket located on the back of the analyzer (see

Figure 1-2

Figure 1-2: Assembling the Clinitek Analyzer

Connect the other end of the power cord into an AC electrical wall
outlet.

CAUTION

The best temperature for using the analyzer is between 22°
and 26°C (72° and 79°F). Do not place the analyzer outdoors
or near windows, ovens, hot plates, or radiators.

1 Serial port
2 Power cord

CAUTION

Use only the power supply adapter included with the
analyzer. A different power supply adapter might damage the
analyzer.

Содержание CLINITEK Status+













































































































































































Результаты поиска

Содержание CLINITEK Status+

Отзывы:

Siemens CLINITEK Status+, Руководство оператора, Страница: 11 / 172

Результаты поиска

Содержание CLINITEK Status+

Отзывы: