Siemens 3VA1 100 A Скачать руководство пользователя страница 281

Страница: 281 / 532

Accessories

4.7 Locking and interlocking

3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02

281

Use the single key to turn the cylinder lock of the 3VA molded case circuit breaker to be

released to the "unlocked" position.

Once the key is in the "unlocked" position, it must not be removed.

Move the handle of the released 3VA molded case circuit breaker to the ON (I) position.

Releasing a different molded case circuit breaker
1.

Move the handle of the currently released molded case circuit breaker to the OFF (O)

position.

Turn the cylinder lock to the vertical "locked" position and remove the key.

This 3VA molded case circuit breaker is now safely locked in the OFF (O) position and

cannot be operated.

Use the same key to turn the cylinder lock of the 3VA molded case circuit breaker to be

released to the horizontal "unlocked" position.

Move the handle of the released 3VA molded case circuit breaker to the ON (I) position.

Interlock combinations
The following interlock combinations can be implemented with cylinder locks:

●

All 3VA1 and 3VA2 molded case circuit breakers can be mutually interlocked.

●

Interlocks can be implemented between all sizes of breakers.

●

Mutual interlocks can be implemented between all 2-pole, 3-pole and 4-pole molded case

circuit breakers.

Содержание 3VA1 100 A





















































































































































































































































































































































































































































































































































Результаты поиска

Содержание 3VA1 100 A

Отзывы:

Бренды по названию

Популярные бренды

Siemens 3VA1 100 A, Руководство пользователя

Результаты поиска

Содержание 3VA1 100 A

Отзывы:

Бренды по названию

Популярные бренды