2
General index
1. INTRODUCTION.
1.1. THANK YOU LETTER.
2. SAFETY INFORMATION.
2.1. USING THIS MANUAL.
2.1.1. Conventions and symbols used.
3. QUALITY ASSURANCE AND STANDARDS.
3.1. STATEMENT BY THE MANAGEMENT.
3.2. STANDARDS.
3.2.1. First and second environment.
3.2.1.1. First environment.
3.2.1.2. Second environment.
3.3. ENVIRONMENT.
4. PRESENTATION.
4.1. VIEWS.
4.1.1. Views of the device.
4.2. DEFINITION OF THE PRODUCT.
4.2.1. Nomenclature.
4.3. OPERATING PRINCIPLE.
4.4. UPS OPERATING MODES.
4.4.1. Notable features.
4.5. OPTIONAL EXTRAS.
4.5.1. Isolation transformer:
4.5.2. Exterior manual maintenance bypass.
4.5.3. Communication card.
4.5.3.1. Integration into computer networks using an SNMP adapter.
4.5.3.2. Modbus RS485.
4.5.3.3. Interface to relays.
4.5.4. Extendable guide kits for mounting in a rack cabinet.
5. INSTALLATION.
5.1. RECEPTION OF THE DEVICE.
5.1.1. Reception, unpacking and contents.
5.1.2. Storage.
5.1.3. Unpacking.
5.1.4. Transport to the site.
5.1.5. Siting, immobilising and considerations.
5.1.5.1. Rotation of the control panel with LCD display.
5.1.5.2. Vertical tower-type mounting.
5.1.5.3. Vertical tower-type mounting with backup extension (battery
module).
5.1.5.4. Mounting as a rack in a 19” cabinet.
5.1.5.5. Rack mounting in a 19” cabinet with backup extension
(battery module).
5.1.5.6. Vertical tower-type mounting with PDU.
5.1.5.7. Rack mounting in 19” cabinet with PDU.
5.1.5.8. Preliminary considerations before connection.
5.1.5.9. Preliminary considerations before connection, regarding the
batteries and their protections.
5.1.5.10. Connection elements.
5.2. CONNECTIONS.
5.2.1. Connection of the input.
5.2.2. Connection to IEC connectors or output terminals.
5.2.2.1. Connection of loads in models up to 3 kVA.
5.2.2.2. Connection of loads in 4 to 10 kVA 10 kVA.
5.2.3. Connection to external batteries (backup extension).
5.2.4. Connection of the input earth terminal
(
)
and the earth
connection terminal
(
)
.
5.2.5. Terminals for EPO (emergency power off).
5.2.6. Terminals for digital input and output to relay. Only in models
with power ratings > 3 kVA.
5.2.7. Manual bypass auxiliary contact terminals. Only in models with
power ratings > 3 kVA.
5.2.8. Connection in parallel, only in models with power ratings > 3
kVA.
5.2.8.1. Introduction in redundancy.
5.2.8.2. Installation and operation in parallel.
5.2.9. Communication port.
5.2.9.1. RS232 and USB port.
5.2.10. Smart slot for the integration of an electronic communication
unit.
5.2.11. Protection against voltage spikes for the modem / ADSL / fax,
etc., line. .
5.2.12. Software.
5.2.13. Considerations before start-up with connected loads.
6. OPERATION.
6.1. START-UP.
6.1.1. Checks before start-up.
6.2. UPS START-UP AND SHUTDOWN.
6.2.1. UPS start-up with mains voltage.
6.2.2. UPS start-up without mains voltage.
6.2.3. UPS shutdown with mains voltage.
6.2.4. UPS shutdown without mains voltage.
