SICK SureSense HSE18L Скачать руководство пользователя

Страница: 2 / 72

Through-beam photoelectric sensor

Operating instructions

Safety notes

■

Read the operating instructions before commissioning.

■

Connection, mounting, and setting may only be performed by trained specialists.

■

Not a safety component in accordance with the EU Machinery Directive.

■

When commissioning, protect the device from moisture and contamination.

■

These operating instructions contain information required during the life cycle of

the sensor.

ATTENTION

WARNING: Interruption, manipulation or incorrect use can lead to hazardous exposure

due to laser radiation.

Correct use

The HSE18L is an opto-electronic through-beam photoelectric sensor (referred to as

"sensor" in the following) for the optical, non-contact detection of objects. A sender (HS)

and a receiver (HE) are required for operation. If the product is used for any other pur‐

pose or modified in any way, any warranty claim against SICK AG shall become void.
The HSE18L sensor complies with the Radio Safety Requirements (EMC) for the indust‐

rial sector (Radio Safety Class A). It may cause radio interference if used in a residential

area.

8017857.YMH6 | SICK

Subject to change without notice

Содержание SureSense HSE18L









































































Результаты поиска

Содержание SureSense HSE18L

Отзывы:

Похожие инструкции для SureSense HSE18L

Бренды по названию

Популярные бренды

SICK SureSense HSE18L, Руководство по эксплуатации

Результаты поиска

Содержание SureSense HSE18L

Отзывы:

Похожие инструкции для SureSense HSE18L

Бренды по названию

Популярные бренды