Incorrect use, improper modification of or tampering with the safety laser scanner will
invalidate any warranty from SICK; in addition, any responsibility and liability of SICK for
damage and secondary damage caused by this is excluded.
2.3
Inappropriate use
The safety laser scanner works as an indirect protective measure and cannot provide
protection from pieces thrown from the application nor from emitted radiation. Trans‐
parent objects are not detected.
The safety laser scanner is not suitable for the following applications, among others:
•
Outdoors
•
Underwater
•
In explosion-hazardous areas
2.4
Applications of the device
The safety laser scanner is used to protect people and systems. The safety laser scan‐
ner is particularly well suited for use in cold store areas.
The safety laser scanner has only a limited ability to handle ambient conditions such as
rain, snowfall, fog or direct sunlight. It is not intended for use in non-covered outdoor
areas.
The safety laser scanner does not offer protection from flying parts or from emitted
radiation.
The safety laser scanner is intended exclusively for use in industrial environments.
Radio interference may result when used in residential areas.
Both stationary applications, e.g., protecting areas or doors, and also mobile applica‐
tions, e.g. AGVs, can be implemented.
The safety level of the safety laser scanner corresponds to category 3 in accordance
with ISO 13849-1, and can be used up to SIL2 in accordance with IEC 61508.
The safety laser scanner is suitable for:
•
Hazardous area protection
•
Hazardous point protection
•
Access protection
•
Vehicle protection (electrically powered industrial trucks)
NOTE
Depending on the application, further protective devices and measures may be
required in addition to the safety laser scanner.
2.5
Requirements for the qualification of personnel
The safety laser scanner must only be configured, mounted, connected, commissioned
and serviced by qualified safety personnel.
Project planning
For project planning, a person is considered competent when he/she has expertise and
experience in the selection and use of protective devices on machines and is familiar
with the relevant technical rules and national work safety regulations.
SAFETY INFORMATION
2
8012029/ZA20/2019-11-14 | SICK
O P E R A T I N G I N S T R U C T I O N S | S3000 Cold Store
11
Subject to change without notice
