Manual
PGT-09-S
52
SICK STEGMANN GmbH
Subject to change without notice
The “Mask” field (1 byte) is suitable to mask bits of the selected trigger source. Click on it to start
an edit session. T
he “Enter-Key” is required to confirm the edited value.
Th
e “Mode” field defines the logical operation to be applied on the selected and masked trigger
source. A drop-down box allows to choose the desired operation. Please note that the first
selection
defines the “no trigger” condition (
trigger disabled
).
The symbol definition is common to some software development languages:
“Equal” / “Not Equal”
” Less Than” / “Less Than or Equal”
“Greater Than” / “Greater Than or Equal”
The “Threshold” field (1 byte) is suitable to define the value to which the masked trigger source
is compared with. Click on it to start an edit session. T
he “Enter-Key” is required to confirm the
edited value.
Watch Filter Mask
The “Watch Filter Mask” (64-bit mask) is used to filter which events are actually logged when
triggered. The text field shows the active pattern based on the bit patterns set by the user in the
check boxes below it:
This field can be used as a push-button. On clicking the shown pattern is made active.
The filter bit patterns can be defined bit-by-bit by using the associated checkboxes: by clicking
the user can toggle the selected bit. On top of the checkboxes corresponding text fields
functioning as push buttons are placed and show the corresponding byte value. To make their
values active they have to be clicked.
