Manual
PGT-09-S
32
SICK STEGMANN GmbH
Subject to change without notice
The
push button is automatically shown after a
“P” command (set breakpoint). Use
it to continue the execution loop after the breakpoint.
The control panel includes further push buttons for saving, loading, and clearing the execution
list.
Please note that these operations are independent from the automatic save/load operations
associated with the exit push button on the header.
Please note that the save operation uses one storage slot so that the last stored execution list
will be overwritten.
Two more push buttons are placed on the control panel not strictly relevant to the execution list.
They are used to either reinitialize the complete HIPERFACE DSL
®
link or the protocol channel
handling messages exchange.
