Manual
PGT-09-S
®
8013604/ WT29
SICK STEGMANN GmbH
Subject to change without notice
19
3.4 TRIGGER connection
The PGT-09-S has a BNC connector suitable for supporting a trigger or
“sync” function,
depending on the operating mode of the tool. The PGT-09-S datasheet must be referred for
finding full details on the electrical specification.
2
1
The interface can be used to feed a
“sync” signal to the tool operating in Master mode (see
chapter 5). Using this interface, the HIPERFACE DSL
®
encoder position acquisition is
synchronized with the external
“sync” signal. For further details on the acquisition
synchronization, please refer to the HIPERFACE DSL
®
User Manual (SICK order no 8013607).
The TRIGGER interface can also be used to feed a trigger signal to the tool when operating in
Analyzer mode (see chapter 7). In this case data logging is triggered by an external event.
