6.3.3.6
Assigning passwords for the service technician or operator
Overview
You can assign passwords for the different user groups here. If desired, you can specify
that all actions are performed by a single user group.
Prerequisites
•
You are registered as a service technician.
Approach
1.
Click on the
Pass
tab.
2.
If desired, activate the
Use one user for all actions
checkbox. If the option is activated,
the Operator user role loses all rights. All actions that require authentication can
only be performed by the Service technician user role.
3.
To change the password for the service technician, activate the
Change service
technician password
checkbox, enter the desired password in the
New password
field
and repeat in the
Confirm new password
field.
4.
To change the password for the operator, activate the
Change operator password
checkbox, enter the desired password in the
New password
field and repeat in the
Confirm new password
field.
5.
If desired, activate the
User signature required to activate safety
checkbox. If the option
is activated, the user must save a signature to complete commissioning. For
example, the report can be used to track which user performed commissioning.
6.
Click on
Apply
.
✓
The
Success
dialog is displayed. Confirm dialog to continue.
6.3.3.7
Configuring the safety laser scanner
6.3.3.7.1
Assigning safety laser scanners
Prerequisites
•
You are registered as a service technician.
Approach
1.
In the graphic overview, click on the free placeholder (e.g.
A
). Free placeholders
are gray.
✓
A list of available and not yet assigned safety laser scanners is displayed.
2.
If several safety laser scanners are used, click on
Identify
if needed.
✓
The display of the selected safety laser scanner flashes.
3.
If the desired safety laser scanner is not displayed, if applicable click on
Rescan
to
update the list.
4.
Click on
Assign
to assign the desired safety laser scanner to a position.
✓
The desired safety laser scanner is assigned to the position. The view changes to
the
Password
tab.
Complementary information
The safety laser scanner must be assigned a password to enable operation.
If the safety laser scanner is in its delivery state, the IP address must be adjusted after
password assignment.
Further topics
•
"Configuring the connection data", page 22
•
"Assigning password for the safety laser scanner", page 23
6
CONFIGURATION
20
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 Tool - URCap
8025720/1A9R/2020-12-15 | SICK
Subject to change without notice
