4.
Click on
Login
.
✓
You are registered as a service technician. The configuration menu opens.
6.3.3.1.2
Resetting the password for service technician
Approach
1.
In the start screen, click on
Settings
.
✓
The
Login
dialog is displayed.
2.
Click on
Forgot PW
.
✓
A reset code is displayed on the screen.
3.
Follow the instructions on the screen to contact SICK technical support. Technical
support can be provide a reset key using the reset code. Do not leave the dialog
until the reset key is available.
4.
Enter reset key in the
Service technician Password
field and click on
Login
.
5.
Assign desired password 2 × and click on
Approve
.
✓
The password is assigned. You can log in with the new password.
6.3.3.2
Configuring table
Prerequisites
•
You are registered as a service technician.
Approach
1.
Click on the
Desk
tab. Alternatively, click on the table.
2.
In the
Width
and
Length
fields, enter the table dimensions.
✓
The table display is adjusted.
3.
Click on
Apply
.
✓
The
Success
dialog is displayed. Confirm dialog to continue.
6.3.3.3
Configuring position of the robot
Prerequisites
•
You are registered as a service technician.
Approach
1.
Click on the
Robot
tab. Alternatively, click directly on the robot.
2.
In the
X
and
Y
fields, configure the position of the robot.
3.
Click on
Apply
.
✓
The
Success
dialog is displayed. Confirm dialog to continue.
Complementary information
Safety-relevant values are marked with the following symbol:
6.3.3.4
Configuring mode and distances for field generation
Overview
Under the
Fields
tab, you can select the mode in which the fields can be configured.
When the
Robot Centric
mode is selected, the calculated safety-relevant distances can
be entered.
6
CONFIGURATION
18
O P E R A T I N G I N S T R U C T I O N S | nanoScan3 Tool - URCap
8025720/1A9R/2020-12-15 | SICK
Subject to change without notice
