Chapter
3
Operating Instructions
ICR890 High-end CCD Camera System
28
©
SICK AG · Division Auto Ident · Germany · All rights reserved
8011325/0000/2006-10-24
Product description
3.2.3
Electrical installation requirements
•
Power supply (via MSC800): 100 to 264 V AC/50 to 60 Hz
•
Reading pulse sensor (start/stop), e.g. photoelectric reflex switch (included in delivery):
For detecting an object with external reading pulse
•
Additional appropriate reading pulse sensor (stop), e.g. photoelectric reflex switch: For
detecting the end of pulse with extended external reading pulse
•
Preconfigured MLG Light Grid(included in delivery): when reading from above to detect
the object distance
•
VMS4xx/5xx Volume Measurement System: when reading from the side or for multi-
side reading to detect the object distance
•
Suitable incremental encoder, e.g. no. 2039455 (resolution 10 mm (394 mil)/pulse) or
no. 2039457 (resolution 0.2 mm (7.9 mil)/pulse) when using the VMS4xx/5xx.
Device is included in delivery depending on the system configuration
•
Host processor with RS 232, RS 422/485 data interface or Ethernet: For further
processing of the reading data via MSC800 also PROFIBUS-DP
•
Suitable visualization PC or PLC: To display the system status
•
Connection cables: See
Chapter 5.3.4 Assembled cables (overview), page 63
3.2.4
Operation requirements
•
PC in the following version:
– Minimum Pentium III, 500 MHz, 128 MB RAM, CD drive, RS 232 serial data interface
or Ethernet interface card, mouse (recommended) and colour monitor
(recommended resolution 1,024 x 768 pixels)
– Operating system Windows 98
TM
, Windows NT4.0
TM
, Windows ME
TM
, Windows
2000
TM
or Windows XP
TM
– Free storage space on the hard drive: Approx. 100 MB for the SOPAS-ET
Configuration Software (V. 2.08) with help files and approx. 70 MB for “Acrobat
Reader“
•
Connection cables see
Chapter 5.3.4 Assembled cables (overview), page 63
•
PC HTML browser, e.g. Internet Explorer
TM
: For online help system to the SOPAS-ET
Configuration Software
•
Special PC for client display of the processed camera image information in real time
equipped with the following:
– Two 1 GBit Ethernet “IntelPro/1000 network card“ interface cards with 8254x
(x = 0, 1, 2, 4, 5, 6, 7) chip set
– GigE vision standard licence for real time image data transfer
