SICK GM32 EX, Руководство по эксплуатации

Страница: 89 / 112

10.9.2 Error messages
Initiator Text Classifica‐
tion Description Possible causes/remedy
System
EEPROM
F ailure
EEPROM parameters corrupted or not compati‐
ble after software upgrade. • Software upgrade: Reset parameters.
Load saved parameters
• Defect: Reload backup. Replace hard‐
ware, if possible.
Spectro com.
F ailure
Communication fault with spectrometer. Error in I2C connection with spectrometer. Plug
connector / check for hardware defect.
Zero com.
F ailure
Communication fault with zero point reflector. Error in I2C connection with zero point reflector.
Plug connector / check for hardware defect.
Temp control
com.
F ailure
Communication fault with temperature control
unit. Error in I2C connection. Plug connector / check
for hardware defect.
Visor com.
F ailure
Communication fault with visor module. Error in I2C connection with visor module. Plug
connector / check for hardware defect.
Filter com.
F ailure
Communication fault with control filter ele‐
ment. Error in I2C connection with control filter ele‐
ment. Plug connector / check for hardware
defect
Mirror com.
F ailure
Communication fault with mirror tracking. Error in I2C connection with mirror tracking.
Plug connector / check for hardware defect.
Lamp com.
F ailure
Communication fault with lamp electronics. Error in I2C connection with lamp electronics.
Plug connector / check for hardware defect.
Visor fault F ailure Error of visor signals. Signal distorted or zero. Check signals and parameters.
Visor values
F ailure
Visor signals outside the valid range. Hardware defect. Electronics not adjustable
(amplification too high).
Visor no signal F ailure All 4Q signals below threshold parameter. Check alignment, reflector, contamination.
Lamp fault
F ailure
Lamp does not go on. Lamp is defective. Replace lamp, see "Replacing
the sender lamp", page 80 .
Mirror adj. End
F ailure
Mirror tracking has reached maximum posi‐
tion. Check alignment, see "Alignment check (option)
- automatic optical alignment check", page 69 .
Zero adj. mc
adj.
F ailure
Beam tracking during adjustment not possible.
Spectro para. F ailure No correct parameters saved in spectrometer. Please contact SICK Customer Service.
Purge air sig‐
nal
F ailure
Digital input signals purge air error. Check purge air supply.
Temp control
out of range
F ailure
Temperature regulation measurement outside
the valid range. Excess temperature switch-off active for temper‐
atures > 70 °C. Switches back on automatically
when < 65 °C.
Extinction calc F ailure Error in extinction calculation.
Please contact SICK Customer Service.
Reference calc F ailure Error in reference calculation.
IIR Filter F ailure Error during IIR filtering.
Interpolation F ailure Error in interpolation calculation.
Eval modul
com.
F ailure
Error in communication with software evalua‐
tion module.
File conditions F ailure Error during condition file access.
File espec F ailure Error during extinction file access.
File cact F ailure Error during lambda coefficient file access.
File measval F ailure Error during measured value file access.
Table 11: Error table: Malfunction message
TROUBLESHOOTING
10
8015558/YYJ8/V1.7/2016-07 | SICK O P E R A T I N G I N S T R U C T I O N S | GM32-Ex 89
Subject to change without notice