1
1
1
1
Figure 10: Mounting examples for device with heating: Mounting via bow-shaped mounting
bracket (SICK accessories). Illustration of the device may differ.
1
Plastic insulation panes
User-supplied brackets
Bracket requirements:
■
Stable mounting device
–
Orientation of the device changeable in the x- and y-axis
–
The mounting device must be able to bear the weight of the device and
connecting cables without shock.
–
Devices with heating: Thermal decoupling of the housing from the bracket
■
Depending on the device, at least three M5 screws for mounting the device
■
Devices with heating: Use three plastic insulating washers for heat decoupling with
respect to the mounting bracket (bow-shaped).
–
The screw length depends on the wall thickness of the mounting device.
–
The maximum screw in-depth in the device is 5 mm from the housing sur‐
face.
5.3
Mounting location
When selecting the mounting location, the following factors are significant:
•
Basic allocation of the scan line to the bar code.
•
Reading distance to the bar code and aperture angle α
•
Angular alignment of the device
•
Avoidance of surface reflections
•
Count direction of the reading angle (position of the bar code along the scan line)
5.3.1
Basic assignment of the scan line to the bar code
The principle assignment of the scan line to the bar code on the object depends on the
sensor type of the device: Line scanner with line scanning or raster scanner with raster
scanning
5
MOUNTING
32
O P E R A T I N G I N S T R U C T I O N S | CLV61x DualPort (PROFINET)
8017842/19XD/2021-11-19 | SICK
Subject to change without notice