SICK CLV61 CAN Series Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 80

background image

Supplementary information

•

The supplementary information on the “CLV61x Dual Port Fixed Mount Bar Code
Scanner (PROFINET)” (English: Part no. 8017978, German: Part no. 8017977) is
an addition to the operating instructions.

•

This supplementary information provides a more detailed description of the proce‐
dures for integrating the device in the PROFINET controller.

You also download the supplementary information from the product page on the Inter‐
net.

The operating instructions and the supplementary information are valid for all available
Dual Port variants of the device. More detailed information on the identification of the
present device type,

see "Type code", page 16

. Available device variants are listed on

the online product page.

For commissioning, an example is given with a device variant, based on the basic
parameter setting of the device.

1.3

Explanation of symbols

Warnings and important information in this document are labeled with symbols. Sig‐
nal words introduce the instructions and indicate the extent of the hazard. To avoid
accidents, damage, and personal injury, always comply with the instructions and act
carefully.

DANGER

… indicates a situation of imminent danger, which will lead to a fatality or serious
injuries if not prevented.

WARNING

… indicates a potentially dangerous situation, which may lead to a fatality or serious
injuries if not prevented.

CAUTION

… indicates a potentially dangerous situation, which may lead to minor/slight injuries if
not prevented.

NOTICE

… indicates a potentially harmful situation, which may lead to material damage if not
prevented.

NOTE

… highlights useful tips and recommendations as well as information for efficient and
trouble-free operation.

1

ABOUT THIS DOCUMENT

6

O P E R A T I N G I N S T R U C T I O N S | CLV61x DualPort (PROFINET)

8017842/19XD/2021-11-19 | SICK

Subject to change without notice

«
...
4
5
6
7
8
...
»

Содержание CLV61 CAN Series

















































































Отзывы:

Нет отзывов

Похожие инструкции для CLV61 CAN Series

Бренд: Aluratek Страницы: 2

Бренд: Ematic Страницы: 31

RFU630-131 Series

Бренд: SICK Страницы: 10

Бренд: SICK Страницы: 40

Lector85 Flex Series

Бренд: SICK Страницы: 48

Бренд: SIIG Страницы: 8

Бренд: Wasp Страницы: 22

ScanPlus S Series

Бренд: Intermec Страницы: 156

Бренд: Xunbao Страницы: 3

Бренд: Datalogic Страницы: 18

QuickScan QBT24XX

Бренд: Datalogic Страницы: 68

Бренд: ACS Страницы: 48

Accu-Reader KW16

Бренд: LockTech Страницы: 2

Бренд: Baseus Страницы: 47

Бренд: Emerson Страницы: 20

HCR350-C Series

Бренд: Uniform Industrial Страницы: 2

MobileLite Wireless

Бренд: Kingston Technology Страницы: 18

RIDA ABSORBANCE 96

Бренд: R-Biopharm Страницы: 57

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды