SICK CLV 41 Series Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 48

SICK CLV 41 Series Скачать руководство пользователя страница 27

CLV 41x Bar Code Scanner

© SICK AG • Auto Ident • Germany • All rights reserved

27

Operating Instructions

8 008 224/I982/08-00

Host Interface

This card is used to change the protocol, start and stop characters, data format and
the transmission rate.

Data Strings

This card is used to change the data output format of the host interface. ASCII
characters and reading diagnosis data can be transferred to the host in the header,
separator and terminator (default setting: no characters). The output format for no
reads and the content of the error string can be modified. The test string function
can also be activated here. If more than one bar code is to be read during each
reading pulse, you can specify the output sequence and sort criteria.

Extras

If required, these tabs are used to treat parameters, which are unknown to the CLV
setup program after an upload from the CLV.

Note:

The program “CLV-Setup Help” describes the functionality and the allowed values of
the parameters. Call “CLV-Setup Help” by pressing “F1”.

«
...
25
26
27
28
29
...
»

Содержание CLV 41 Series

















































Отзывы:

Нет отзывов