DATOSPIR
· User’s Manual
EN 16
511-D00-MUM · Rev 1.01
3.3 BATTERY: INSTALLATION AND CHARGING
DO NOT use battery types different from the ones specified in this manual.
Respect the polarity indicated in the battery placement. If not, the device
will not turn on.
DATOSPIR
can work with two AAA
alkaline batteries or two rechargeable
Ni-Mh 1.2V 800mAh batteries. In both
cases, the approximate autonomy with
normal use is 5 days.
Use a coin to turn the screw to unblock the
battery cover to remove the battery. Then,
replace them according to the polarity
indicated on the housing.
3.4 VISUAL INDICATIONS AND WARNINGS
Indicator
Warning
Description
1 s
...
Device on
0,2 s
...
Activated communications
Transferring data
0,1 s
...
Recovery mode
It allows updating the firmware (only USB)
0,2 s
...
BIOS Mode
It allows restoring the firmware when the
communication is interrupted (USB only)
0,1 s
...
Measurement error
Internal measurement error. Restart the
device or contact Technical Support
1 s
...
Low battery
Replace the batteries