DATOSPIR
· User’s Manual
EN 7
511-D00-MUM · Rev 1.01
In case of receiving
DATOSPIR
with a deteriorated packaging, DO NOT use the device
and please contact your courier agency, dealer or SIBEL S.A.U. After Sales Service.
DO NOT use
DATOSPIR
outdoors.
DO NOT use
DATOSPIR
in moving transport vehicles.
ELECTRICAL RISK
DATOSPIR
is NOT intended to be used with other energy sources that are not covered
in this manual.
DO NOT try to open the device. In case of malfunction or unexpected operation, please
contact
SIBEL S.A.U.
After Sales Service or your dealer.
According to EN60601-1, the equipment is classified as a continuous operation mode, and
due to its intended use, it is considered as applicable part in its entirety.
The acquisition and sending of flow samples to the external software is considered to be an
essential operation in order to comply with the specified accuracy and / or indicate whether
the maneuver is correct.
RISK OF ELECTRICAL SHOCK
DATOSPIR
is designed to be used in conjunction with a software application, such
as W20s Spirometry Software, running on an external device. This device must fulfill the
low voltage Directive (particularly EN 60950-1 standard) and EMC Directive (particularly
EN 55022, EN 61000-3-2, EN 61000-3-3 and EN 55024 standards).
DO NOT connect
DATOSPIR
to other devices in order to keep product safety.
Temporary immersion of any device part is NOT allowed. MAY CAUSE ELECTRIC DISCHARGE.
Contact of liquids with the internal parts of the device and the connectors must always be
avoided.