background image

8

Power type

Low Voltage (24V DC)

Lithium (12V DC)

Line Voltage (110V AC)

RTS

Primary control via included 

RTS receiver 

Primary control via 

included RTS receiver

Primary control via included RTS 

receiver

DCT

Additional / redudant control 

via included RJ11 wired 

connection, Pinout A 

N/A

Additional / redudant control via 

included RJ11 wired connection, 

Pinout B

IR 

Additional / redudant control 

via optional IR receiver/ 

IR remote to RJ11 wired 

connection, Pinout A

N/A

Additional / redudant control via 

optional IR receiver/ IR remote to 

RJ11 wired connection, Pinout B

485

Additional / redudant control 

via optional one-way 485 

dongle.

N/A

Additional / redudant control via 

optional two-way 485 card.

Zigbee 3.0

N/A

N/A

Additional / redudant control via 

optional two-way Zigbee 3.0 Glydea 

card.

Note: All additional/redudant control options shown above can all be used at the same time. For 

example, you can use both The RTS control and the optional two-way 485 control with the same 

motor.

Refer to this table for your control options, pinouts and connections.

DCT RJ11 Pinout B

Closed 

Stop 

N/A 

Ground 

N/A 

Open

DCT RJ11 Pinout A

Closed 

Stop 

+5V DC 

Ground 

IR Out (+) 

Open

SDN (485) connection

Data +(WHT/ ORG)

Data - (ORG)

Ground - (BRWN)

485 port

Upto 200' max. CAT 5e or better

Control Wiring

CONTROL WIRING

 Glydea Ultra 35/60

Irismo45

Irismo35

Содержание Veil Tracks


















Отзывы: