Shuttle MV43VN, Руководство пользователя

Страница: 70 / 79

- 66 -
Video Off Method
This determines the manner in which the monitor is blanked.
Blank Screen The item only writes blanks to the video buffer.
V/H SYNC+Blank This selection will cause the system to turn off
the vertical and horizontal synchronization
ports and write blanks to the video buffer.
DPMS Support Initial display power management signaling.
Ø
The choice: Blank Screen, V/H SYNC+Blank, or DPMS Support.
MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the
system from a power-saving mode, use this item to specify the interrupt
request line (IRQ) that is used by the modem. You might have to con-
nect the fax/modem to the mainboard Wake On Modem connector for
this feature to work.
Ø The choice: 3, 4, 5, 7, 9, 10, 11, or NA.
Soft-Off by PWRBTN
Under ACPI (Advanced Configuration and Power management Interface)
you can create a software power down. In a software power down, the
system can be resumed by Wake Up Alarms. This item lets you install a
software power down that is controlled by the normal power button on
your system. If the item is set to Instant-Off, then the power button causes a
software power down. If the item is set to Delay 4 Sec. then you have to
hold the power button down for four seconds to cause a software power
down.
Ø The choice: Delay 4 Sec or Instant-Off.
Run VGABIOS if S3 Resume
This determines whether or not to enable the system to run the VGA
BIOS when resuming from STR/S3.
Ø The choice: Auto, Yes or No.
Power on After PWR-Fail
This item enables your computer to automatically restart or return to its
last operating status after power returns from a power failure.
Ø The choice: On, Off, Former-Sts.
IRQ/Event Activity Detect
Press <Enter> to enter into the detailed options.