Shuttle MV43VN, Руководство пользователя

Страница: 72 / 79

- 68 -
Resume by PCI PME
This item specifies whether the system will be awakened from power sav-
ing modes when activity or input signal of the specified hardware periph-
eral or component is detected.
Ø
The choice: Disabled or Enabled.
Modem Ring Resume
Enable Modem Ring-in to resume the system.
Ø The choice: Disabled or Enabled.
RTC Alarm Resume
When set to Enabled, the following two fields become available and you
can set the date (day of the month), hour, minute and second to turn on
your sys-tem. When set to 0 (zero) for the day of the month, the alarm will
power on your system every day at the specified time.
Ø The choice: Disabled or Enabled.
* Date (of Month)
This item selects the alarm date.
Ø
Key in a DEC number: Min=0, Max=31.
* Resume Time (hh:mm:ss)
This item selects the alarm time.
[hh]
Ø Key in a DEC number: Min=0, Max=23.
[mm] Ø Key in a DEC number: Min=0, Max=59.
[ss]
Ø
Key in a DEC number: Min=0, Max=59.
IRQs Activity Monitoring
Press <Enter> to enter the sub-menu of detailed options.
Primary INTR
Select ON/OFF to enable/disable a specified IRQ.
Ø The choice: OFF or ON.
A cluster of IRQs is listed as follows. As one certain IRQ is enabled,
any activity at it will awaken the system from a power-saving mode.
IRQ3 (COM 2)
IRQ4 (COM 1)