Shuttle MV43VN, Руководство пользователя

Страница: 39 / 79

- 35 -
E1
F
Other Connectors
ATX Power Supply Connector (ATX1/ATX2)
This mainboard uses 20-pin (ATX1)Pentium 4 standard ATX power header,
and other ATX2 with 2x2-pin +12V PC ATX power supply headers.
Please make sure you plug in the right direction.
A traditional ATX system should remain at power off stage when AC power
resumes from power failure. In such case, if there is no an UPS to keep power-
on, the kind of design is inconvenient for a network server or workstation.
However, this mainboard implements an AC Power Auto Recovery function to
solve this problem. You may enable the function "Restore On AC/Power Loss”
that is under sub-menu of Power Mangement Setup through BIOS setup pro-
gram.
Note 1: The ATX power connector is directional and will not go in unless
the guides match perfectly making sure that pin#1 is properly
positioned.
Note 2: Make sure the latch of the ATX power connector clicks into place
to ensure a solid attachment.
Note 3: Your ATX power supply must be supplied to ACPI +5V standby
power and at least 720mA compatible.
Note 4: Make sure your power supply have enough power for higher
speed processor installed.
ATX1
ATX2
ATX2
ATX1