Shuttle MV43VN, Руководство пользователя

Страница: 59 / 79

- 55 -
Boot Other Device
If you enable this item, the system will also search for other boot de-
vices if it fails to find an operating system from the first two locations.
Ø The choice: Enabled or Disabled.
Swap Floppy Drive
This item allows you to swap the logical arrangement of the floppy
drives. Instead of opening up the mainboard case to do it physically,
you can set this item to Enabled. Then the first drive will be mapped as
drive B: and the second drive, mapped as drive A:, which is the oppo-
site of the usual convention.
Ø The choice: Enabled or Disabled.
Boot Up Floppy Seek
If this item is enabled, it checks the size of the floppy disk drives at start-
up time. You don't need to enable this item unless you have a legacy
diskette drive with 360K capacity.
Ø The choice: Disabled or Enabled.
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your
system is started.
Ø
The choice: Off or On.
Typematic Rate Setting
If this item is enabled, you can use the following two items to see the
typematic rate and the typematic delay settings for your keyboard.
Ø The choice: Enabled or Disabled.
Typematic Rate (Chars/Sec)
Use this item to define how many characters per second are generated
by a held-down key.
Ø The choice: 6, 8, 10, 12, 15, 20, 24, or 30.
Typematic Delay (Msec)
Use this item to define how many milliseconds must elapse before a
held-down key begins generating repeat characters.
Ø The choice: 250, 500, 750, or 1000.
Security Option
If you have installed password protection, this item defines if the pass-
word is required at system start up, or if it is only required when a user
tries to enter the Setup Utility.
Ø The choice: Setup or System.