- 75 -
New Password Setting:
1. While pressing <Enter> to set a password, a dialog box appears to
ask you enter a password.
2. Key in a new password that can not exceed eight characters.
3. System will request you to confirm the new password again.
4. When completed, new code takes effect.
No Password Setting:
If you want to disable the password, just press <Enter> as a password
input is requested.
If You Forget Password:
If you forget the password, the only way to access the system is to clear
the CMOS memory. Please refer to page 28 on clear CMOS setting.
@
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
SAVE to CMOS and EXIT (Y/N) ? Y
Pressing 'Y' stores the selections made in the menus of CMOS.
Next time you boot your computer, the BIOS configures your system
according to the Setup selections stored in CMOS. After saving the
values, the system is restarted again.
@
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit Without Saving (Y/N) ? N
This allows you to exit from Setup without storing in CMOS any
change. The previous selections remain in effect. This exits from the
Setup utility and restarts your computer.
Содержание MV43VN
Страница 1: ...MV43VN Pentium 4 Processor Based DDR SDR MAIN BOARD User s Manual ...
Страница 23: ... 19 5 Internal speaker header SPK1 Step 9 Connect the Power Supply 1 System power connectors ATX2 ATX1 SPK1 ...
Страница 24: ... 20 Step 10 Install Add on Cards in Expansion Slots 1 Accelerated Graphics Port AGP Card 2 PCI Card 3 CNR Card ...