ShowMagic AV Скачать руководство пользователя страница 93 | Manualshive

Страница: 93 / 233

ShowMagic AV Скачать руководство пользователя страница 93

Triggering Pan FX and Tilt FX using Sound-To-Light

Clicking on the button below the first,

Delay

Offset

fader enables you to select a sound-to-light slot

to use for that FX scene.

Clicking on the buttons below the

Pan FX

and

Tilt FX

Speed faders can be used to select one of the

frequency ranges (

Off

,

PK

,

LF

,

LM

,

HM

or

HF

respectively) to trigger that FX.

When the appropriate range on that slot is triggered, the pan or tilt moves, at the speed selected with
its Speed fader, then it stops until it is triggered again. Setting different frequency ranges for the

Pan

FX

and

Tilt FX

, or setting one of them to sound-to-light and the other to a normal speed setting, can

produce interesting pan and tilt FX that follow the music.

The Random Slope Buttons

If you click on the buttons labelled

R

below the

Pan FX

and

Tilt FX

Slope faders it activates them

(turns them blue). When activated ShowMagic will then randomly pick whether to use the selected
slope setting or jump to the opposite FX position each time round. This can be very effective,
especially when used in conjunction with the sound-to-light options above - producing even more
varied patterns that follow the music - sometimes moving smoothly, sometimes snapping.

The Shape FX Presets

Combining the

Pan FX

and

Tilt FX

presets can

produce many waveform type shapes, but in
order to create geometric shapes such as circles
and ellipses the pan and tilt values must be
calculated and applied mathematically to
achieve the desired shape. The

Shape FX

presets are provided for this purpose.

The two most useful geometric shapes have
been provided -

Circle

and

Ellipse

.

The

Pan FX

and / or

Tilt FX

presets can be used

in conjunction with the

Shape FX

presets, as

described later. For now, de-select any

Pan FX

and

Tilt FX

presets that may be highlighted.

Select the

Shape FX

Circle

preset - the faders

and FX Window on the FX generator panel
will change.

FX generator for a circle

The first fader remains the Offset Delay fader with a sound-to-light slot selector button below it, the
second fader changes to a

Shape FX

Speed fader with a sound-to-light band selector button below it,

and the third fader becomes the

Shape FX

Slope fader.

The selected shape is also now shown in FX Window and the centre handle is used to change the
size of the circle. Dragging the centre handle to the right of centre increases the size, dragging to the
left of centre decreases the size. When a

Shape FX

preset is first selected its default size is 50%.

Section 7 - Lighting Scene Panel

81

«
...
91
92
93
94
95
...
»

Содержание AV










































































































































































































































Отзывы:

Нет отзывов