ShowMagic AV Скачать руководство пользователя страница 175

Страница: 175 / 233

CC Off/Ex

- Checks whether the trigger is currently off, and if it is the event is run and will not be

turned off until it is finished in the same way as the

On/Ex

setting.

On/Pause

All Trigger Inputs

- If

On/Pause

is set then a trigger will run the event if it is off and the next

trigger will pause the event until another trigger is received to continue running the event and so on.
To stop the event prematurely, the

Stop

motor control button should be used.

Triggering Action Buttons

Besides running and stopping events assigned to action buttons by double-clicking on the action
button, clicking on the

button (or pressing

[Spacebar]

), running the action button in a schedule

etc., they can also be triggered in the following ways (as described later in this section):

a) When ShowMagic receives selected notes or program change commands from the MIDI

port, e.g. using a MIDI keyboard or MIDI sequencer etc. Within this section we will assume
that you have a MIDI keyboard connected to a PC MIDI port.

b) When a wireless 'Media Player' remote controller is used.

c) When ShowMagic receives command strings via RS232 or a script has been loaded for a

data acquisition ‘input’ device, as described in "Configure Comm Devices", p.24.

d) When ShowMagic receives command strings from an IP outstation - see "Configure

Outstations", p. 28.

e) When specified DMX input values are received, from a lighting desk for instance when

using a DMX interface / card with DMX input capability.

If any action buttons are triggered, by any means, the fade

and

Out

times set for that event will be

used.

The various action button triggering options are as follows:

MIDI Input Triggering

Situated just below the details display are the MIDI trigger displays.

The MIDI trigger display

Section 12 - Action Panel

163

Содержание AV










































































































































































































































Результаты поиска

Содержание AV

Отзывы:

ShowMagic AV, Руководство пользователя, Страница: 175 / 233

Результаты поиска

Содержание AV

Отзывы: